Hydrophilic silicone oil JYC330 for cotton
introduction
The new three copolymerization of hydrophilic silicone oil JYC330 is the use of new quaternary ammonium salt synthesis three copolymerization structure modified hydrophilic high softening agent. JYC330 has excellent stability in alkaline and high temperature conditions, particularly suitable for use in cylinder. JYC330 gives the fabric more soft and silky and the feeling of fullness, and has good hydrophilic properties of cotton fabrics treated with hydrophilic 2~3 seconds.
Technical indicators
Appearance: light to light yellow transparent solution
Solubility: soluble in water
Ionic nature: nonionic
pH value: 5~8 (1% water solution 20 ℃)
Product feature
1. The product structure is special, easily soluble in water, but also for non ionic, good compatibility, excellent compatibility with general textile auxiliaries, and the Yin and Yang, non ion textile auxiliaries use bath products;
2. Alkali resistant performance is excellent, this product is added into the working fluid added to 80 ℃ 5g / L NaOH solution or 5g / L Na?CO? heating remained stable, the floating oil, strong electrolyte resistance, high shear, safety and stability, no oil stain;
3. Soft, smooth, non greasy, similar to the natural; good hydrophilicity, and truly solve the contradiction between the touch, hydrophilic and washing resistance;
4. It is suitable for all kinds of process equipment, high flexibility.
5. This product is the best kind especially on cotton, but also is suitable for various fibers and fabrics; using this fabric has good hydrophilicity, which can directly repair color, and can avoid color repair two times pollution problems.
usage
Padding process: the amount of 20~50g/L, 100 ℃ of pre drying, shaping 150~180 ℃, 50 seconds.
Impregnation process: the amount of 2~5% (o.w.f), temperature 30~50, time 20~30 minutes, dehydration, drying 100℃.
The user through the process please adjust the sample as appropriate. (according to the standard concentration meter)
Dilution method:
This product is highly concentrated, the use should be diluted first, then it can be applied to general postprocessing on textiles, this product can be diluted with cold water, according to the recommended dilution ratio of silicone oil: water about =1:4,to join the weighing of the silicone oil, and then put a small amount of water, and then open the mixer, stirring edges will be half the
water slowly into the pot of materials, the blender running 10 minutes, then add the remaining measurement of water content needed to, and stirred for about 10 minutes, can be obtained with a blue transparent to translucent emulsion, stop stirring, filter material.
packaging and storage
120kg/barrel, seal save in a cool and dry place, quality guarantee period 12 months.
