SILICONESOFTENER JYC325
PRODUCTDESCRIPTION
l Appearance: light yellow transparent viscous liquid
l PH Value: 6-8
l Ionicity: weak cationic
APPLICATIONFIELDS
l Used for the after finishing of fabrics and make fabricsvery soft and smooth .
APPLICATIONPROCESS
l Dipping: the general handle feelingfinishing : 0.5~2%（o.w.f.）. Ice handle feeling finishing :3~10%（o.w.f.）
l Padding: the general handle feeling finishing :5~20g/L.a dipping and a padding with the pick up ratio of 80%.
l Please users adjust the specific dosage by doing experiment.
GENERAL FEATURES
l APEO- free
l Belongs to new ternary copolymerized silicone oil,1% solution can operate normally in the PH rangeof 3-10, thestability is good.
l Can casually stir to dilute bywater, and the settingtemperature doesn’t exceed 150℃.
l Can substitute for soft oil,softener flakes and also can beused for making softening in vat; will not stickto roller or float oil; and it will also not break the emulsion in the caseof70℃.Besides, it can make fabric very soft, thick,flexible and smooth.
l The finished fabrics can be redyeddirectly, not to stripSilicon. Besides, it will have good washing fastness.
l The finished fabrics have noyellowing and it ill not influence the color fastnessand color light, it has bright effectinstead, can be used for bleaching and thelight color fabrics.
l High concentrated product, thecompatibility is very good, users can dilute the corresponding amounts orcompound according to your demands.( Suggestion: dilution at 1:5-1:10)
STORAGE
l Away from direct sunlight
l In the cool ,dry and ventilated places, at a temperatureunder 32℃
l Half year
PAKAGE
125kg plastic drum
TRANSPORTATION
According to non-dangerous chemicalsto transport.
EQUIPMENT
Be Indicated for using onto settingmachines.
WARNING
This technical data sheet does notreplace either the Safety Data Sheet or the specific Conformity Declaration.These documents may be required to our SHEQ (Product safety office), at thefollowing e-mail address: akash_chen@163.com
The technical data sheet does not relieve the printer, whoremains the only responsible of the respect of the regulations, thespecifications and the related required certifications of the finished items.
